$36.99
Social Share :
— OR —
Properties:
1. Compatible with the the Nintendo console.
2. Wireless connection, stable connection signal.
3. Can be used as a whole controller. Can also be used as 2 independent controls.
4. Supports automatic pairing with switch host, plug and play, without setup, simple and convenient.
5.One key connection method for easy handling.
6. The built-in 300 mA lithium battery can be used continuously for about 4 hours after fully charged.
7. Supports the motion detection function via the gyro integrated in each controller.
8. Supports vibration function via built-in motor in each controller.
9. Supports capture gameplay screenshots.
10. Multiplayer games can be interrupted by connecting multiple wireless controllers to a switch console at the same time.
11. The ergonomic design and lightweight construction make it comfortable even for long hours of uninterrupted play.
Attention:
NOT support NFC function and camera function. Not compatible with original controller accessories.
The built-in motor is not a linear motor and the vibration experience can vary in some games.
|
|
|
|---|---|---|
Wired connectionOn the host interface, insert the left and right grip rails into the left and right rail slots of the host, respectively, to establish a cable connection with the host. If you insert the left and right handles into the left and right slide rails of the SWITCH main unit, you will hear a locked sound (while the screen also prompts you) when it is in position. After the handle is inserted into the main unit, the main unit is automatically connected to the handle and identifies the handle. | Wireless connectionTurn on the host of the switch. On the main interface of the host, touch “Controller” → “Change grip / order” with your finger to enter the interface for the host pairing mode. Press and hold the sync button to turn on the handle, and the four LEDs will quickly flash into the search status. If one (or more) LEDs are always on, the handle has been successfully connected. | Wake up the hostA. When the controller is in sleep mode, press the menu button on the right controller and the screenshot button on the left controller about 2 seconds to wake up the controller, and the controller will automatically connect to the host. B. In the host sleep state, first press the power button of the host to wake up the host, and then short press the menu button or the screenshot button of the handle to connect to the host (in the host sleep state, directly press any button on the handle to wake up the host). |
Step 1: press the screenshot button about 2 seconds to turn on left handle, then LED will flash quickly and enter the search state, when one (or more) of the LEDs are always on, it means the pairing is successful.
Step 2: Press the SL and SR button on the side of the left handle at the same time. The corresponding LED light will be on, indicating that the connection is successful.
Step 3: Press the left button of the arrow key to return to the main page of the host.
Completing steps， the left handle can be used as an independent handle .
Step 1: press the home button about 2 seconds to turn on right handle, then LED will flash quickly and enter the search state, when one (or more) of the LEDs are always on, it means the pairing is successful.
Step 2: Press the SL and SR button on the side of the right handle at the same time. The corresponding LED light will be on, indicating that the connection is successful.
Step 3: Press A key to return to the main page of the host.
Completing steps, the right handle can be used as an independent handle .
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Reviews
There are no reviews yet.